안드로이드 부팅과정

Starting kernel ...

Uncompressing Linux................................................................................................................................... done,
 booting the kernel.
Linux version 2.6.29 (qt@hs) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-41) ) #38 PREEMPT Thu Jul 2 16:57:30 KST 2009
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SMDK6410
Memory policy: ECC disabled, Data cache writeback
CPU goldfish (id 0x36410101)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C64XX: PLL settings, A=666000000, M=532000000, E=24000000
S3C64XX: HCLKx2=266000000, HCLK=133000000, PCLK=66500000
mout_apll: source is fout_apll (1), rate is 666000000
mout_epll: source is fout_epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 532000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
usb-host-bus: source is mout_epll (0), rate is 24000000
uclk1: source is dout_mpll (1), rate is 66500000
spi-bus: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
s3c64xx: 10485760 bytes SDRAM reserved for fimc at 0x506e2000
s3c64xx: 24117248 bytes SDRAM reserved for pp at 0x510e2000
s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x527e2000
s3c64xx: 6291456 bytes SDRAM reserved for mfc at 0x52fe2000
s3c64xx: 4194304 bytes SDRAM reserved for jpeg at 0x535e2000
s3c64xx: 1048576 bytes SDRAM reserved for cmm at 0x539e2000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: root=/dev/mtdblock3 rootfstype=yaffs2 init=/init console=ttySAC0,115200
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 201472KB available (3752K code, 1030K data, 140K init)
Calibrating delay loop... 665.19 BogoMIPS (lpj=3325952)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 564 bytes
NET: Registered protocol family 16
S3C6410 Power Management, (c) 2008 Samsung Electronics
S3C6410: Initialising architecture
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
Total 32 DMA channels will be initialized.
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
S3C64XX ADC driver, (c) 2008 Samsung Electronics
S3C64XX ADC driver successfully probed
audit: initializing netlink socket (disabled)
type=2000 audit(0.450:1): initialized
ashmem: initialized
NTFS driver 2.1.29 [Flags: R/W].
yaffs Jul  2 2009 12:04:53 Installing.
msgmni has been set to 393
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
S3C_LCD clock got enabled :: 133.000 Mhz
LCD TYPE :: LTE480WV will be initialized
Window[0] - FB1: map_video_memory: clear ff000000:003a9800
            FB1: map_video_memory: dma=5f000000 cpu=ff000000 size=003a9800
Console: switching to colour frame buffer device 100x30
fb0: s3cfb frame buffer device
Window[1] - FB1: map_video_memory: clear ff3aa000:000bb800
            FB1: map_video_memory: dma=5fb00000 cpu=ff3aa000 size=000bb800
fb1: s3cfb frame buffer device
Window[2] - FB1: map_video_memory: clear ff466000:000bb800
            FB1: map_video_memory: dma=5fc00000 cpu=ff466000 size=000bb800
fb2: s3cfb frame buffer device
Window[3] - FB1: map_video_memory: clear ff522000:000bb800
            FB1: map_video_memory: dma=5fd00000 cpu=ff522000 size=000bb800
fb3: s3cfb frame buffer device
Window[4] - FB1: map_video_memory: clear ff5de000:000bb800
            FB1: map_video_memory: dma=5fe00000 cpu=ff5de000 size=000bb800
fb4: s3cfb frame buffer device
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
brd: module loaded
loop: module loaded
nbd: registered device at major 43
usbcore: registered new interface driver ub
dm9000: found (0x90000a46)(0x90000a46/0x90100a46)
<DM9KS> I/O: f7600000, VID: 90000a46
eth0 (): not using net_device_ops yet
dm9000: found (0x90000a46)(0x90000a46/0x90100a46)
Linux video capture interface: v2.00
gspca: main v2.4.0 registered
s3c-fimc: controller 0 registered successfully
s3c-fimc: controller 1 registered successfully
S3C6400 MFC Driver, (c) 2007 Samsung Electronics
S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics
S3C6410 TV encoder Driver, (c) 2008 Samsung Electronics
 S3C6410 TV encoder Driver init OK.
S3C6410 TV scaler Driver, (c) 2008 Samsung Electronics
 S3C6410 TV scaler Driver init OK.
S3C Rotator Driver, (c) 2008 Samsung Electronics
s3c_rotator_probe called
s3c_rotator_probe success
S3C JPEG Driver, (c) 2007 Samsung Electronics
>> peter jpg_data_base_addr = 0x535e2000 <<
s3c_g2d_probe called
 s3c_g2d_probe Success
 S3C G2D Init : Done
S3C G3D Driver, (c) 2007-2009 Samsung Electronics
s3c_g3d version : 0x1050000
 S3C G3D Init : Done
S3C CMM Driver, (c) 2008 Samsung Electronics
Driver 'sd' needs updating - please use bus_type methods
S3C NAND Driver, (c) 2008 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
Creating 7 MTD partitions on "NAND 512MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "Bootloader"
0x000000040000-0x000000060000 : "Environment"
0x000000060000-0x000000360000 : "Kernel"
0x000000360000-0x000000760000 : "Root"
0x000000760000-0x000000f60000 : "cache"
0x000000f60000-0x000004160000 : "system"
0x000004160000-0x000020000000 : "userdata"
spi /dev entries driver
S3C64XX SPI Driver
hspi registers d0834000 (cfde0520, c03dcb18)
hspi irq resource c03dcb34 (80)
s3c2410-spi s3c2410-spi.0: s3c2410-spi.0: S3C SPI adapter
s3c2410-spi.0: S3C SPI adapter
hspi registers d0838000 (cfde0480, c03dcb58)
hspi irq resource c03dcb74 (81)
s3c2410-spi s3c2410-spi.1: s3c2410-spi.1: S3C SPI adapter
s3c2410-spi.1: S3C SPI adapter
aoe: AoE v47 initialised.
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
mice: PS/2 mouse device common for all mice
S3C Touchscreen driver, (c) 2008 Samsung Electronics
S3C TouchScreen got loaded successfully : 12 bits
input: S3C TouchScreen as /class/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410_rtc: tick irq 34, alarm irq 92
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c.0: slave address 0x10
s3c2440-i2c s3c2440-i2c.0: bus frequency set to 377 KHz
parent clock for camera: 266.000 MHz, divisor: 6
s3c2440-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c2440-i2c s3c2440-i2c.1: slave address 0x10
s3c2440-i2c s3c2440-i2c.1: bus frequency set to 377 KHz
parent clock for camera: 266.000 MHz, divisor: 6
s3c2440-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
oprofile: using arm/armv6
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
yaffs: dev is 32505859 name is "mtdblock3"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.3, "mtdblock3"
yaffs: restored from checkpoint
yaffs_read_super: isCheckpointed 1
VFS: Mounted root (yaffs2 filesystem) on device 31:3.
Freeing init memory: 140K
Warning: unable to open an initial console.
init: hardware=goldfish
init: cannot open '/initlogo.rle'
init: command 'loglevel' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'symlink' r=-1
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mount' r=0
init: command 'mount' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: mtd partition 0, Bootloader
init: mtd partition 1, Environment
init: mtd partition 2, Kernel
init: mtd partition 3, Root
init: mtd partition 4, cache
init: mtd partition 5, system
init: mtd partition 6, userdata
yaffs: dev is 32505861 name is "mtdblock5"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.5, "mtdblock5"
yaffs: restored from checkpoint
yaffs_read_super: isCheckpointed 1
init: command 'mount' r=0
init: command 'mount' r=0
yaffs: dev is 32505862 name is "mtdblock6"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.6, "mtdblock6"
s3c-nand: ECC uncorrectable error detected
s3c-nand: ECC uncorrectable error detected
block 580 is bad
block 581 is bad
yaffs_read_super: isCheckpointed 0
init: command 'mount' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
yaffs: dev is 32505860 name is "mtdblock4"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.4, "mtdblock4"
yaffs_read_super: isCheckpointed 0
init: command 'mount' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: /system/default.prop:open error
init: /data/local.prop:open error
init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
init: processing action 0x26cc8 (boot)
init: command 'ifup' r=0
init: command 'hostname' r=0
init: command 'domainname' r=0
init: command 'setrlimit' r=0
init: command 'write' r=-1
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: starting 'console'
init: starting 'servicemanager'
init: starting 'vold'
init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
init: starting 'debuggerd'
init: starting 'ril-daemon'
init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
init: starting 'zygote'
init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
init: starting 'media'
init: cannot find '/system/bin/playmp3', disabling 'bootsound'
init: starting 'dbus'
init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
init: starting 'installd'
init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
init: starting 'flash_recovery'
init: starting 'goldfish-setup'
sh: can't access tty; job control turned off
# init: starting 'qemud'
init: Created socket '/dev/socket/qemud' with mode '666', user '0', group '0'
init: starting 'goldfish-logcat'
init: command 'class_start' r=0
init: processing action 0x289a0 (boot)
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'stop' r=0
init: command 'stop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: processing action 0x278d0 (property:persist.service.adb.enable=1)
init: starting 'adbd'
init: command 'start' r=0
init: waitpid returned pid 1789, status = 00000100
init: process 'flash_recovery', pid 1789 exited
init: event { 'add', '/class/vc/vcs1', 'vc', '', 7, 1 }
init: event { 'add', '/class/vc/vcsa1', 'vc', '', 7, 129 }
init: event { 'remove', '/class/vc/vcs1', 'vc', '', 7, 1 }
init: event { 'remove', '/class/vc/vcsa1', 'vc', '', 7, 129 }
init: event { 'add', '/class/vc/vcs1', 'vc', '', 7, 1 }
init: event { 'add', '/class/vc/vcsa1', 'vc', '', 7, 129 }
init: event { 'remove', '/class/vc/vcs1', 'vc', '', 7, 1 }
init: event { 'remove', '/class/vc/vcsa1', 'vc', '', 7, 129 }
init: event { 'add', '/class/vc/vcs1', 'vc', '', 7, 1 }
init: event { 'add', '/class/vc/vcsa1', 'vc', '', 7, 129 }
init: event { 'remove', '/class/vc/vcs1', 'vc', '', 7, 1 }
init: event { 'remove', '/class/vc/vcsa1', 'vc', '', 7, 129 }
init: event { 'add', '/kernel/uids/1000', 'uids', '', -1, -1 }
init: event { 'add', '/kernel/uids/1013', 'uids', '', -1, -1 }
init: event { 'add', '/kernel/uids/1002', 'uids', '', -1, -1 }
init: waitpid returned pid 1791, status = 00000100
init: process 'qemud', pid 1791 exited
init: waitpid returned pid 1792, status = 00000000
init: process 'goldfish-logcat', pid 1792 exited
DM9000 work in 16 bus width
DM9000: INT active high
init: event { 'add', '/kernel/uids/1001', 'uids', '', -1, -1 }
warning: `rild' uses 32-bit capabilities (legacy support in use)
init: waitpid returned pid 1790, status = 00000000
init: process 'goldfish-setup', pid 1790 exited
init: event { 'add', '/class/vc/vcs1', 'vc', '', 7, 1 }
init: event { 'add', '/class/vc/vcsa1', 'vc', '', 7, 129 }
init: event { 'remove', '/class/vc/vcs1', 'vc', '', 7, 1 }
init: event { 'remove', '/class/vc/vcsa1', 'vc', '', 7, 129 }
init: event { 'add', '/class/vc/vcs7', 'vc', '', 7, 7 }
init: event { 'add', '/class/vc/vcsa7', 'vc', '', 7, 135 }
init: event { 'add', '/kernel/uids/10001', 'uids', '', -1, -1 }
init: event { 'add', '/kernel/uids/10011', 'uids', '', -1, -1 }
init: event { 'add', '/kernel/uids/10002', 'uids', '', -1, -1 }
init: event { 'add', '/kernel/uids/10005', 'uids', '', -1, -1 }
init: event { 'add', '/kernel/uids/10007', 'uids', '', -1, -1 }